#Teseo naxos cad eng software#

Adjust the inclination of the symmetry axis to make the mirrored section match the position of the reference.

Select all the lines to mirror, click on the Mirro r icon and Indicate the symmetry axis to mirror the piece automatically.

Click on Reference and insert two or more fixed points.

In order to control better the symmetry of the pattern, digitize two or more references along the perimeter on the side of the pattern which has not been digitized yet.

Select symmetry with a click insert the initial point of the axis, drag the cursor in order to obtain the angle and the required length, and with a second click insert the end point of the axis.

Select the symmetry axis or mirror the pattern.

Quit the function with Esc or with the special key.

Click on marks andР’В cutsР’В and apply the sameР’В procedure used forР’В the perimeter to digitize the marks or the internal cutting of the piece.

Quit the function with Esc from the keyboard or with the special key.

Repeat the same operation to insert other lines.

Quit the insertion of the points with the special key.

Click on the perimeter and with the selection key insert a perimeter line.

The following operations are required in order to create a model pattern:Р”Р‡ollow the digitizing steps and rule as mentioned above. Select the icon Options > Click on the Insertion page and configure the parameters as given in the picture >Р’В Check that Standard Line type is set on NURBS type> In the РІР‚СљFirst objectРІР‚Сњ box select РІР‚СљTypeРІР‚Сњ and РІР‚СљNameРІР‚Сњ as Model pattern РІР‚СљР’В Click OK to confirm.

During the insertion, it is possible to quit the function with the Esc key.

To delete the last knot inserted during the insertion phase: click with the 1 or right click and select the function Delete point or press the Del.

Underlays, lasting margins, folding allowances, assembly lines and all the lines deriving from the style ones must not be inserted.

Copy only the model pattern style lines.

At every corner position, you can press 0,2, 0 buttons.

To digitize a straight line, only two points are required.

Very curved lines more knots are required Pattern, a following rules must be followed.

Use the special key to quit the function or the button ESC on the keyboard.

Repeat the operation to insert the second reference.

With a click on the selected key insert the first reference.

Insert the two reference points marked on the paper model pattern base.

The cursor on the monitor follows the original co-ordinates of the tablet digitizer.Р”В¤. The related key on theР”В¬ommands toolbar appears as pushed when enabled and it is red This function allows making the actual co-ordinates of the cursor on the digitizing tablet correspond to those of the cursor on the monitor. The X-axis of the video corresponds to the length of the model pattern while the Y-axis corresponds to theР”Р€. Must be positioned according to the direction for the Position the model pattern on the digitizing tablet. These references will be then digitized in order toР”В¬oordinates to centralize the model pattern.Р”Сћ.

These steps will be same for digitizing any model, piece (symmetric or Operations are required in order to connect the digitizers with NAXOS software.

Key 2 Special Key Equivalent with mouse scroll key.

button 1 Menu Key Equivalent with mouse right key.

Key 0 Selection Key Equivalent with mouse left key.Now USB ported digitizers are also available in the Previously digitizer is connected with PCs There are mainly 4 buttons and 16 buttons digitizerРІР‚в„ўs headsР”Р„re used for digitizing purpose. The other operations the mouse can also be used. Pattern or those of the pieces and it works only if used on the tablet. The digitizer is required to digitize the lines of the model WORK STATION IN CUTTING & PRE-FITTING SECTION & RELATED MACHINE.Leather Goods Making process and the position of the leather industry of India in the global market.Some photoshop tools for leather goods students.Optitex CAD (PDS 2D) for Leather Goods Students.

#Teseo naxos cad eng software#

PROCAM DIMENSIONS (CAD Software for Shoe Designing).